Hiring Guides

Lifting over the cab, and why it needs front legs

A crane sits behind the cab and can turn all the way round. Whether it can lift on the way round is a different question, and it depends on the legs.

Published by Nortons Hiab Services Ltd

A Nortons rigid working under trees with its crane raised beside a large observation wheel
Slewing round the front

Every crane on our fleet slews continuously, which means it will keep turning in one direction rather than stopping at a limit. What it will lift while it is facing forwards over its own cab is a separate matter entirely.

The stability problem

A lorry is long and narrow. Lifting off the back or off the side, the outriggers give a wide, stable base and the chassis behind the crane holds the vehicle down. Lifting over the front, the crane is trying to tip the vehicle over its front axle, and there is a lot less lorry in front of the column than behind it.

So on a vehicle with rear stabilisers only, capacity over the front is heavily restricted or the machine will not permit the lift at all. That is not a fault. It is the machine refusing to do something unsafe.

Front stabiliser legs

The fix is a second set of legs behind the cab. With those deployed the vehicle has a stable base in every direction and the crane can work through a genuine 360 degrees at something much closer to its rated capacity.

That capability is why some jobs specify a particular vehicle rather than any vehicle. If the only place the lorry can stand means lifting forwards, front legs are the whole job.

Variable stability

Modern machines also read where the boom is and how far the legs are out, and adjust what they will lift accordingly. On a tight site where one leg cannot come out fully, the crane knows, and it reduces capacity on that side rather than assuming everything is ideal.

It is worth understanding because it explains something that otherwise looks like the crane being awkward. A machine that lifted three tonnes yesterday and refuses two today has not developed a fault; it has less leg spread.

What to tell us

If there is only one way the lorry can face, say so. It changes which vehicle we send, and finding out on site costs a day.

Which vehicles have front legs · Load charts · Operated hire

Next

More like this

Hiring Guides

What a hiab cannot do

We would rather tell you on the phone than after the lorry has driven two hundred miles. Here are the jobs a lorry crane is the wrong tool for.

Hiring Guides

Grass is not a standing position

An outrigger can put over twenty tonnes of force through a plate the size of a dinner tray. What is underneath it decides whether that is fine or a very bad afternoon.

Everything we have written

Tell us what needs lifting

Tell us what you need lifting or transporting and we will come back with a vehicle and a price.

ALLMI trained driver / operators · RAMS, method statements and lift plans · Euro VI clean air zone compliant fleet, renewed by continual investment in new wagons · All our accreditations